- Available for all your questions
- Shopping at a Belgian family-run business
- Large selection, best prices
- Available for all your questions
- Shopping at a Belgian family-run business
Reviews (0)
Write the first reviewCineStill
CineStill Cs2 Simplified ECN-2 Motion Picture Film Processing Kit (Powder) - 1L
Please note that this ECN-2 kit is mainly suitable for (motion picture) color films that do not have a remjet layer like the CineStill 50D and 800T films. Use our liquid remjet removal agent from Bellini to utilize the full capacity of this kit if your film contains a remjet layer such as self-cut Kodak Vision3 film. If the remjet layer is not removed this kit is one-shot!
CineStill is known for bringing the typical low-contrast film look of motion picture film to analog "still" photography by converting and adapting fresh Kodak motion picture film into film photography formats. They cut Vision3 motion picture film into 35mm and 120 roll film formats and remove the well-known remjet layer so the film can easily be processed in the C-41 color negative chemistry.
Developing CineStill films like 50D and 800T in C-41 color chemistry indeed gives unique results that have that moody cinematic look. However, the full potential of these films can only be achieved when developing the film in proper motion picture chemistry which is the ECN-2 process designed by Kodak. ECN-2 is a complex process that was until a few years ago only accessible for cinematographers. However, some products came on the market that allowed home users to also develop their motion picture films in a simplified version of the ECN-2 proces. The most known product is the liquid ECN-2 Kit from Bellini which can also be found at Retro Camera. CineStill itself now also comes with its own simplified version of the ECN-2 process with the Cs2 Processing Kit which can be seen as the missing puzzle in their attempt to bring motion picture film look to analog still photography.
The CineStill Cs2 2-bath process simplifies the original 10+ step Kodak ECN-2 process, with uncompromised quality and accurate characteristic curves, while making it safe and foolproof for at-home use. Any motion or still photography film can be processed in this simplified 2-bath powder kit, resulting in a low-contrast color negative that is suitable for the motion picture workflow and scanning. It recommended to always overexpose your color film with one stop to get the best results.
| Quantity | 1 liter |
| Concentrate type | Powder |
The Cn2 Color Negative Developer is combined with a pre-bath accelerant which kicks off development to produce proper ECN-2 density. The bleach and fixer baths are combined with the stop and washing baths in the Bf2 Bleach&Fix+Stop” bath, to reduce risks to health & safety and processing defects caused from hazardous chemical carryover. Bf2 comes in two parts that have to be mixed before use. After a final washing of your film you will have CineStill negatives matching Kodak’s characteristic curves for proper ECN-2 motion picture processing. In contrast to the Cs41 process, the Cs2 process has to be maintained at 40 °C at all time making a temperature control system like the TCS-1000 necessary.
The kit has a capacity of 8 35mm films (36 exposures) or 120 films that don't have a remjet layer! Genuine motion picture film that is for example cut by yourselves from a roll (non-CineStill films) contains a remjet layer that has to be removed before using this kit using our liquid remjet removal solution from Bellini. If the remjet layer is not removed this kit will be one-shot as the remjet layer will contaminate the baths. The Cn2 Color Negative Developer has a shelf life of about two weeks that can be doubled using an anti-oxidizing spray like Tetenal Protectan. The Bf2 bath has a longer shelf life.
Full instructions on how to use this kit can be found here.
Features:
-
Suitable for (motion picture) color negative films without a remjet layer
-
Powder components which can easily be mixed. Gives 1 liter of solution
-
Simple 2-bath process at about 40 °C
-
Great for extremely high contrast scenes or to achieve the low-contrast cinematic look of motion picture negatives
-
Optimized for motion picture logarithmic scanning and ECP film printing
-
Does not contain caustic compounds or poisonous byproducts associated with ECN-2 processing (such as lye, sulfuric acid, hydrogen sulfide and sulfur dioxide fumes, or highly toxic cyanide gas)
- Not suitable for making RA-4 photo prints
Reviews (0)
Write the first reviewKeep me posted
Leave your email address. We will notify you as soon as this product is back in stock.
- Product: CineStill Cs2 Simplified ECN-2 Motion Picture Film Processing Kit (Powder) - 1L
- Size: