• Bereikbaar voor al jouw vragen
  • Winkelen bij een Belgisch familiebedrijf
  • Groot aanbod, kleine prijzen
  • Bereikbaar voor al jouw vragen
  • Winkelen bij een Belgisch familiebedrijf

Jouw winkelmandje is nog leeg.

Reviews (0)

Schrijf eerste review
Nog geen reviews

Kaiser Fototechnik

Kaiser System-V VP 6005 B&W Vergroter (tot filmformaat 6x6 cm)

Schrijf eerste review
| 4465
€ 1808,99

Kies uw kleur:

NoColour

Kies uw maat:

1Size

Levering 2-3 Werkdagen

De Kaiser VP 6005 zwart-wit vergroter wordt geleverd met negatiefhouder met anti-newton glas, 6x6cm masker, 24x36mm masker, 75W opaallamp, twee lenshouderringen en stofkap. Een vergroterlens is niet inbegrepen en is afzonderlijk verkrijgbaar. Vergroter is geschikt tot filmformaat 6x6cm en kan indien nodig later omgebouwd worden voor gebruik tot formaat 6x9cm (zoals de VP 9005).

This VP 6005 B&W enlarger is part of Kaiser's top-of-the-line System-V enlarger series which are still built in Germany. The VP 6005 condensor enlarger with B&W head is suitable for printing black-and-white negatives up to size 6x6cm (2.4 x 2.4 inch) and is compatible with lenses up to a focal length of 80mm.

This B&W enlarger is equipped with a tiltable lens stage with spirit level and red filter, which allows you to correct any distortion based on the Scheimpflug principle. The specific design of the lens attachment allows you to quickly changes lenses. Precise focussing is possible thanks to the additional fine focusing drive mechanism. 

Negatives are easily loaded into the removable compound negative carrier of which the top plate is made from anti-newton glass and the bottom plate is optical flat glass for the best performance. The negative carrier has interchangeable film inserts and adjustable masking strips and film stops and is fitted with grid pins so no need to purchase any separate negative carriers anymore if you want to work with different film formats. The double condensor system covers both 35mm and medium format films, so no change of condensors is necessary when printing.

The VP 6005 also comes with a filter drawer for use with multigrade filters.

The enlarger has a baseboard of size 450x500x28mm (17.7x19.7x1.1 inch) and is fitted with a 75W opal lamp (E27). Height adjustments goes easily with the hand-crank operated friction drive on plastic bearings. The design of the enlarger allows both floor and wall projection. If needed, the enlarger can also be used as a copy stand for film scanning. Additional accessoires are however needed in that case.

Most important features:

  • For film formats up to 6x6 cm and lenses up to 80mm focal length;

  • Removable compound negative carrier with interchangeable inserts, adjustable masking strips and grid pins;

  • Wall and floor projection, tiltable lens stage, distortion correction on Scheimpflug principle;

  • White-light lever for simultaneous swinging in and out of filters, with control light;

  • Exchangeable double condenser system;

  • UV and IR filter integrated;

  • Filter drawer for multigrade filters;

  • Quick-change attachment for enlarging lenses;

  • Height adjustment by hand-crank operated friction drive with weight compensation by roll-off spring mechanism;

  • Manual fine focusing.

Technical details:

  • Baseboard size: 450x500x28mm (17.7x19.7x1.1 inch);

  • Lamp: opal lamp 75 W, E 27 socket;

  • Power cord: approx. 2.50m (8 foot 2 inch);

  • Filter drawer: 85x85 mm (3.3 x 3.3 inch);

  • Column (HxWxD): approx. 1000x70x35mm (39.4x2.8x1.4 inch) ;

  • Distance between optical axis and column base: approx. 220 mm (8.7 inch);

  • Can be converted into a copy stand with additional accessories.

Reviews (0)

Schrijf eerste review
Nog geen reviews